Jobs in Blue Ash, OH

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Brief Job Description This position performs autonomous execution of skilled trade tasks associated with the maintenance of site facilities equipment. **This position operates on a 2-2-3 Schedule, 12 hour shifts Job Responsibilities (Including Key Result Areas, Specific Accountabilities, Tasks, Etc.) * Read SOPs (Standard Operating Procedures) and excerpts from technical documentation * Ensure proper documentation practices during maintenance processes * Perform preventative (scheduled) and corrective/emergency (unscheduled) maintenance of equipment, systems, and/or facilities without supervision * Conduct troubleshooting activities * Gather, organize, and communicate operational information to others * Participate in spill control, handling of hazardous materials, and first aid * Use CMMS (Computerized Maintenance Management System) to document all maintenance activities * Identify temporary and permanent fixes to address issues * Monitor equipment and/or systems for performance and problem indicators * Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard Operating Procedures), including general safety, and lock out tag out * Report process deviations when they occur * Wear gowning, and PPE (Personal Protective Equipment) as required by specific activities including; fall protection harness, safely googles, chemical resistant coverall, and chemical resistant gloves as needed * Monitor and analyze Facilities equipment performance * Perform, in order of priority, work required in response to process equipment requests received through the Work Request System * Read and interpret diagrams, drawings, and other schematics * Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance. * Perform infrared, vibration, pressure, superheat, and subcooling readings * Perform daily Facility equipment checks * Monitor building management alarm system and respond appropriately * Pull necessary parts to complete a work order or ticket * Provide input on the engineering of replacement parts Minimum Requirements Experience maintaining Facilities systems including building fire systems, plumbing, lighting, HVAC, Boilers, Chillers, air handlers, humidifiers and air dryers. Strong communication skills, written and verbal Preferred Background High school diploma or equivalent and certification in a skilled trade (electrical, boiler operations, etc.) Associate's degree in a technical discipline desirable 2 Years experience with building fire systems, plumbing, lighting, HVAC equipment (boilers, chillers, cooling towers, air handlers, humidifiers, and air dryers), low voltage electrical systems, emergency diesel generators. Relevant skilled trades training or certificates Prior experience with CMMS Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Position Summary The Supply Chain Analyst I supports supply chain master data activities and system-driven processes that enable new product introductions, ongoing manufacturing operations, and regulatory compliance. This role assists in maintaining accurate data within enterprise systems such as SAP and supports documentation and process activities, bill of materials (BOM), and operational changes. The Supply Chain Analyst I collaborates with Operations, Quality, Regulatory Affairs, IT, and Commercial teams to ensure supply chain data accuracy and process consistency. This role provides operational support for ERP system processes and contributes to maintaining compliant and efficient supply chain operations in a cGMP-regulated environment. Position Responsibilities Support packaging artwork updates, BOM creation, and BOM changes to enable new product introductions and product lifecycle updates. Assist in processing documentation change requests and tracking implementation progress within established systems and workflows. Maintain supply chain master data within ERP systems and artwork repositories (such as SAP, Gazelle and Blue) in accordance with established procedures and data governance standards Support the maintenance and organization of approved artwork within designated systems and ensure accurate distribution to approved vendors and suppliers. Coordinate with internal stakeholders and external vendors to support artwork updates and packaging documentation changes. Perform routine ERP system transactions and data maintenance activities to support manufacturing and supply chain operations. Assist in data validation, documentation updates, and testing activities related to ERP system enhancements, upgrades, and implementations. Support user acceptance testing (UAT), data verification, and issue tracking during system updates or process improvements. Work with team members and cross-functional partners to resolve data discrepancies and maintain system accuracy. Collaborate with Supply Chain, Operations, Quality Assurance, Regulatory Affairs, and IT teams to support supply chain processes and documentation updates. Participate in project meetings and provide updates on assigned tasks and progress. Assist in maintaining project tracking tools and status updates for supply chain documentation and system-related tasks. Ensure assigned activities are performed in accordance with cGMP requirements, internal quality systems, and regulatory standards. Maintain accurate records and documentation to support internal audits and regulatory inspections. Follow, assist and support in identifying opportunities to improve data accuracy, documentation processes, and system workflows. Participate in training to build knowledge of ERP systems, supply chain processes, and regulatory requirements. Minimum Qualifications Experience in one or more of the following areas- Packaging operations, Production Planning, Quality Assurance, Packaging Technical Services, or MRP and Advanced Planning Systems Basic understanding of the packaging processes, artwork processes, compliance, and cGMPs Knowledge of cGMP and FDA regulations involving data management and validation requirements Good interpersonal and project management/coordination skills required. Must be analytical, assertive, detail oriented, highly disciplined, independent, and able to prioritize with minimum supervision. Demonstrated high-level attention to detail Preferred Qualifications Bachelor's degree, preferably within a technical or scientific field MRP and Planning

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Brief Job Description This position performs autonomous execution of skilled trade tasks associated with the maintenance of site facilities equipment. **This position operates on a 2-2-3 Schedule, 12 hour shifts Job Responsibilities (Including Key Result Areas, Specific Accountabilities, Tasks, Etc.) * Read SOPs (Standard Operating Procedures) and excerpts from technical documentation * Ensure proper documentation practices during maintenance processes * Perform preventative (scheduled) and corrective/emergency (unscheduled) maintenance of equipment, systems, and/or facilities without supervision * Conduct troubleshooting activities * Gather, organize, and communicate operational information to others * Participate in spill control, handling of hazardous materials, and first aid * Use CMMS (Computerized Maintenance Management System) to document all maintenance activities * Identify temporary and permanent fixes to address issues * Monitor equipment and/or systems for performance and problem indicators * Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard Operating Procedures), including general safety, and lock out tag out * Report process deviations when they occur * Wear gowning, and PPE (Personal Protective Equipment) as required by specific activities including; fall protection harness, safely googles, chemical resistant coverall, and chemical resistant gloves as needed * Monitor and analyze Facilities equipment performance * Perform, in order of priority, work required in response to process equipment requests received through the Work Request System * Read and interpret diagrams, drawings, and other schematics * Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance. * Perform infrared, vibration, pressure, superheat, and subcooling readings * Perform daily Facility equipment checks * Monitor building management alarm system and respond appropriately * Pull necessary parts to complete a work order or ticket * Provide input on the engineering of replacement parts Minimum Requirements Experience maintaining Facilities systems including building fire systems, plumbing, lighting, HVAC, Boilers, Chillers, air handlers, humidifiers and air dryers. Strong communication skills, written and verbal Water Purification Industrial Maintenance Certification Universal Section 608 HVAC License Electrical/Electronics Certification Infrared, Vibration, Ultrasound Certification Electrical, HVAC/Refrigeration, Pipe Fitting, or Fire Alarm Journeyman License Automated Material Handling Preferred Background High school diploma or equivalent and certification in a skilled trade (electrical, boiler operations, etc.) Associate's degree in a technical discipline desirable 2 Years experience with building fire systems, plumbing, lighting, HVAC equipment (boilers, chillers, cooling towers, air handlers, humidifiers, and air dryers), low voltage electrical systems, emergency diesel generators. Relevant skilled trades training or certificates Prior experience with CMMS Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com The Process Engineer II, will handle execution of technical aspects of product and/or process technology transfer to the site through successful completion of PPQ. This includes feasibility evaluations, design, execution, and documentation of engineering studies, component specification and evaluation, and all other activities required to support delivery of a complete, validated process to manufacturing. Individuals in this role work closely with facilities, Validation, PMO, Supply Chain, Operations, Quality, and technical experts performing transfers to the site to ensure process implementation to commercial manufacturing follows project timelines and corporate standards. After completion of PPQ, the Process Engineer leads improvement initiatives as the technical expert and acts as the first line of support for all project related work. Responsible for maintaining a strong relationship with Technical Operations and Quality areas, as well as, collaborating within Manufacturing and the Facility and with other Engineers. Serves as the single point of contact for all technical issues. Job Responsibilities * Ensures there is 1 technical process with centerlines, critical process parameters, material fit for use, and operating procedures are clear and delivers a capable process. * Leads the following continuous process improvement efforts: changeover reduction, yield improvements, OEE improvements, maintenance reliability and waste reduction for improvement of automated pharmaceutical manufacturing equipment. * Ensures success criteria for technology transfer and validation is clear and the process is capable for the merge into the Manufacturing/Facility process. * Generates a variety of URS, FAT, SAT, commissioning, and IQ/OQ/PQ protocols/ reports. * Coordinate and support Manufacturing/Facility improvement initiatives that define equipment data, equipment capabilities, utilization, efficiencies, and obsolescence. Manages life cycle of assets. * Maintain external technical relationships and collaborates with equipment and material suppliers. * Identify, develop, generate, and manage implementation of appropriate change controls to improve processes and address root causes identified in investigations. * Perform and maintain risk management activities for new and existing processes / equipment. * Initiate deviations and performs/facilitates the technical investigations and assessment of impacts. * Authors and review documents including Standard Operating Procedures, Batch Records, Rework procedures and other forms. Author, review and approve validation and change control documents such as master plans, protocols, summary reports and change requests. * Provides input and develops user requirements for new asset procurement. * Provide engineering and project management services. * Assist in the development of project justification and engineering proposals including providing input for capital planning process. * Identify and support technical training requirements for Operations/Engineering/Maintenance for new and existing processes/equipment. * Perform routine validation and periodic reviews activities. * Supports and leads technical trouble shooting. * On-call support as required. * Key contact for regulatory inspections as technical process owner. * Participates in annual product review process. * Participates in biennial critical systems review process. * Responsible for process validation required because of changes to validated processes within Manufacturing. Minimum Requirements * Training or experience in t

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Brief Job Description This position performs autonomous execution of skilled trade tasks associated with the maintenance of site facilities equipment. **This position operates on a 2-2-3 Schedule, 12 hour shifts Job Responsibilities (Including Key Result Areas, Specific Accountabilities, Tasks, Etc.) * Read SOPs (Standard Operating Procedures) and excerpts from technical documentation * Ensure proper documentation practices during maintenance processes * Perform preventative (scheduled) and corrective/emergency (unscheduled) maintenance of equipment, systems, and/or facilities without supervision * Conduct troubleshooting activities * Gather, organize, and communicate operational information to others * Participate in spill control, handling of hazardous materials, and first aid * Use CMMS (Computerized Maintenance Management System) to document all maintenance activities * Identify temporary and permanent fixes to address issues * Monitor equipment and/or systems for performance and problem indicators * Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard Operating Procedures), including general safety, and lock out tag out * Report process deviations when they occur * Wear gowning, and PPE (Personal Protective Equipment) as required by specific activities including; fall protection harness, safely googles, chemical resistant coverall, and chemical resistant gloves as needed * Monitor and analyze Facilities equipment performance * Perform, in order of priority, work required in response to process equipment requests received through the Work Request System * Read and interpret diagrams, drawings, and other schematics * Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance. * Perform infrared, vibration, pressure, superheat, and subcooling readings * Perform daily Facility equipment checks * Monitor building management alarm system and respond appropriately * Pull necessary parts to complete a work order or ticket * Provide input on the engineering of replacement parts Minimum Requirements Experience maintaining Facilities systems including building fire systems, plumbing, lighting, HVAC, Boilers, Chillers, air handlers, humidifiers and air dryers. Strong communication skills, written and verbal Water Purification Industrial Maintenance Certification Universal Section 608 HVAC License Electrical/Electronics Certification Infrared, Vibration, Ultrasound Certification Electrical, HVAC/Refrigeration, Pipe Fitting, or Fire Alarm Journeyman License Automated Material Handling Preferred Background High school diploma or equivalent and certification in a skilled trade (electrical, boiler operations, etc.) Associate's degree in a technical discipline desirable 2 Years experience with building fire systems, plumbing, lighting, HVAC equipment (boilers, chillers, cooling towers, air handlers, humidifiers, and air dryers), low voltage electrical systems, emergency diesel generators. Relevant skilled trades training or certificates Prior experience with CMMS Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Job Summary The Manufacturing Technician III, (Mechanic - Device Assembly) reports to the Supervisor or Manager on the Manufacturing floor, which supports Device Assembly operations. The position entails the execution of setup, changeover, repairs, and preventative maintenance for all equipment used in the production processes in various Classified/Non-Classified areas and performs the role of a Device Assembly Technician as needed. It requires the ability to perform mechanical and electronic troubleshooting in order to ensure optimal equipment performance. The Manufacturing Technician III will also provide basic mechanical training to Device Assembly Technicians and serve as a resource for the implementation of continuous improvement projects. **This position will initially be a M-F 8-hour dayshift position. Eventually this position will transition to The dayshift 6AM-630PM 2-2-3 rotation. Job Responsibilities Operate, monitor, troubleshoot, and perform maintenance tasks on device assembly equipment. Work collaboratively with technical resources to resolve equipment issues as needed. Act as a first-line technical resource for the team. Provide technical support to production technicians. Resolve equipment-related issues, including equipment start-up, machine recipe selection, recipe format set-up, critical sensor challenge, and production issues. Proactively monitor equipment and perform preventative maintenance tasks. Identify and investigate abnormal conditions and potential defects to prevent unplanned equipment downtime. Perform technician tasks as required including start-up, equipment operation, manual inspection, batch execution, material handling, rework, cleaning, housekeeping and line clearance activities. Operate light material handling equipment (motorized and manual pallet jacks, non-motorized lifts) as the need arises to safely move, store or deliver material to the proper location. Monitor material quality of incoming, in-process and finished materials. Promptly escalate concerns to Lead Technician and Manager/ Supervisor as needed. Perform batch records, GMP documentation, and CMMS entries. Perform mathematical computation as needed. Be familiar with job-related safety procedures and hazards including PPEs, ergonomics, LOTO, human safety, material handling, chemical handling, and spill controls. Report all discrepancies to process facilitator. Perform work requirements in a responsible manner, in accordance with SOPs, cGMPs, and established safety and quality procedures. Other Responsibilities Support lean activities and process improvement work such as performing 5S in the work area, participating in problem-solving, and manual tracking of performance data for OEE and process improvement analysis. Lead Level 0 problem-solving on equipment related issues as needed. Act as a certified OJT trainer on the team on assigned equipment or process tasks. Train and conduct evaluations on other team members for training qualifications. Review process documents such as operational SOPs, PM procedures, forms and batch records for accuracy. Identify and provide suggestions for process improvement while maintaining quality and cGMP compliance as opportunities arise. Execute protocols as required as a part of equipment qualification and process validation work Be flexible and support other work areas within the Process Execution Team as needed Perform all other assigned duties with minimal supervision under the direction of the process facilitator or designee as needed. Acquire and maintain all required cert

Relocation Assistance Offered A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Position Summary The Automation Engineer III is responsible for delivering technical projects for the manufacturing intelligence and automation systems for an Inspection, Device Assembly, and Packaging facility. The engineer will provide change management and lifecycle analysis for systems within their area of expertise. This position will be located at our Blue Ash facility. Responsibilities Interface with several types of equipment and systems, including but not limited to PLCs, SCADAs, HMIs, Servers, Databases, Data Historian, Visualization, and other automation equipment. Experience with networking, including but not limited to VLAN, Subnets, and IP protocols. Participate and support in the design, optimization, commissioning, or validation of newly procured or existing equipment as the automation lead. Consult cross-functionally and assist system owners in process development as the automation subject matter expert. Review and approve requirements, specifications, drawings, coding procedures, and guidelines. Provide technical guidance and train others on systems, software, equipment, machines, procedures, and/or processes. Communicate priorities and progress to the team on a continuing basis. High technical ability with a troubleshooting approach. Identify temporary and permanent fixes to address issues. Review and approve documentation needed for the qualification of equipment and processes. Author, review, and revise SOPs and specifications to maintain equipment, systems, and/or facilities. Ensure proper documentation practices during maintenance processes. Recommend and initiate activities to ensure area and equipment are maintained in a state of compliance. Assess and implement improvements in productivity, waste generation, quality, and cost. Lead and coordinate investigations and studies with little supervision. Interact with regulatory agency personnel during audits and inspections. Perform quality audits to ensure devices used are in proper working condition. Provide 24/7 support to others as part of a rotating on-call support system. All other tasks as needed or assigned by the supervisor. Minimum Requirements Significant experience supporting manufacturing operations in a regulated or cGMP environment Experience with the following Automation systems (PLC, HMI, SCADA): Rockwell, Inductive (Ignition), or Siemens (Desigo CC) Preferred Background Bachelor's degree in engineering, computer science, or a related discipline Experience with Data Historian and Visualization systems such as Aveva PI (OSI PI) Experience with Microsoft SQL database design Knowledge of GAMP 5 and ISA standards Knowledge of GMP principles (change control, deviation, CAPA, validation, and qualification) This position may also include the following conditions: Sitting and working on computers, meeting with stakeholders for design requirements, working with vendors and regulatory authorities, occasionally working on the plant floor and interacting with equipment. The items described here are representative of those that must be met successfully to perform the essential functions of this job. Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Brief Job Description This position performs autonomous execution of skilled trade tasks associated with the maintenance of site facilities equipment. **This position operates on a 2-2-3 Schedule, 12 hour shifts Job Responsibilities (Including Key Result Areas, Specific Accountabilities, Tasks, Etc.) * Read SOPs (Standard Operating Procedures) and excerpts from technical documentation * Ensure proper documentation practices during maintenance processes * Perform preventative (scheduled) and corrective/emergency (unscheduled) maintenance of equipment, systems, and/or facilities without supervision * Conduct troubleshooting activities * Gather, organize, and communicate operational information to others * Participate in spill control, handling of hazardous materials, and first aid * Use CMMS (Computerized Maintenance Management System) to document all maintenance activities * Identify temporary and permanent fixes to address issues * Monitor equipment and/or systems for performance and problem indicators * Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard Operating Procedures), including general safety, and lock out tag out * Report process deviations when they occur * Wear gowning, and PPE (Personal Protective Equipment) as required by specific activities including; fall protection harness, safely googles, chemical resistant coverall, and chemical resistant gloves as needed * Monitor and analyze Facilities equipment performance * Perform, in order of priority, work required in response to process equipment requests received through the Work Request System * Read and interpret diagrams, drawings, and other schematics * Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance. * Perform infrared, vibration, pressure, superheat, and subcooling readings * Perform daily Facility equipment checks * Monitor building management alarm system and respond appropriately * Pull necessary parts to complete a work order or ticket * Provide input on the engineering of replacement parts Minimum Requirements Experience maintaining Facilities systems including building fire systems, plumbing, lighting, HVAC, Boilers, Chillers, air handlers, humidifiers and air dryers. Strong communication skills, written and verbal Preferred Background High school diploma or equivalent and certification in a skilled trade (electrical, boiler operations, etc.) Associate's degree in a technical discipline desirable 2 Years experience with building fire systems, plumbing, lighting, HVAC equipment (boilers, chillers, cooling towers, air handlers, humidifiers, and air dryers), low voltage electrical systems, emergency diesel generators. Relevant skilled trades training or certificates Prior experience with CMMS Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit www.resilience.com Brief Job Description Provides leadership and project management in executing facilities related tasks necessary for maintenance, repair and operation of Facilities equipment and systems. Lead the planning and scheduling of maintenance for the Facilities Group. Job Responsibilities (Including Key Result Areas, Specific Accountabilities, Tasks, Etc.) * Ensure proper documentation practices during job activities. * Ensure Preventative Maintenance is scheduled appropriately for the Facilities team * Track preventative maintenance, calibration metrics and compliance reports for the facility. * Perform visual inspections. * Gather, organize, and communicate operational information to others. * Use CMMS (Computerized Maintenance Management System) to manage logistics. * Use CMMS to track inventory and materials when planning work. * Communicate priorities and progress to team on a continuing basis. * Assist with coordinating activities of support groups. * Monitor records to ensure compliance with regulatory requirements. * Attend inter-departmental meetings to discuss matters involving the coordination of multiple departments. * Coordinate with vendors or representatives from other departments as needed to appropriately schedule work. * Interact with other departments to implement corrective/preventative actions. * Participate in cross-functional teams to meet strategic goals. * Perform data entry. * Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard Operating Procedures), including general safety, lock outs and so on. Wear gowning, and PPE (Personal Protective Equipment) as required by specific activities. Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance. Assign work tasks and activities to others. Other Duties: Prepare documentation of activities, actions, and/or results. Update/Write job plans as needed. Read SOPs (Standard Operating Procedures) and excerpts from technical documentation. Minimum Requirements Extensive experience in Maintenance of HVAC and Refrigeration Systems, Electrical Systems, Plumbing, Compressed Air, Hydraulics, Strong Interpersonal Skills, Self-Motivated Strong Organizational Skills Strong communication skills, written and verbal Preferred Background High School Education Extensive experience in Maintenance or Technical Documentation CMMS background knowledge Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an